water-based Ceramic paint using a safe and non-toxic formula, excluding benzene, ketone, esters, formaldehyde, free TDI toxic heavy metals, water-based ceramic paint Vov content is low, smell small, harmless to the human body, do not burn. Water-soluble ceramic paint can be used to replace thinner, convenient construction and lower cost; water-based ceramic paint with water resistance, alcohol resistance, impact resistance, water-based ceramic paint film hardness (up to 4H), with ultra-high brightness, strong adhesion, high temperature resistance, anti-aging performance characteristics, is a green and safe, healthy environmental protection of new environmental coatings.
The characteristics of water-based ceramic paint are as follows:
water-based Ceramic paint belongs to water-based paint, the use of safe and non-toxic formulations, do not contain benzene, ketone, esters, formaldehyde, free TDI toxic heavy metals, water-based ceramic paint Vov content is low, smell small, harmless to the human body, do not burn. water-based ceramic paint can be used to replace thinner water, convenient construction and low cost.
water-based ceramic paint is mainly suitable for spraying, dipping or coating, such as construction.
Single Layer Construction
Take a certain amount of water-based ceramic paint, add a certain amount of tap water to adjust the viscosity (18 22 S, Tu-4 cups, 25 Shan), the amount of water according to climate, room temperature, construction habits, product requirements of their own adjustment, suitable for spraying, after spraying a few minutes can be placed in the oven, the gradual baking to 170-180 Shan, thermostat $number min, you can cool the finished product.
Primer construction method refers to the single layer construction method, if the primer to be decal paper, the primer to bake, the temperature is slightly lower, 150-160 Shan thermostat $number min, not sticky hand, a little water can be, and then paste the paper, and then the surface paint treatment, method ibid. If the primer does not decal paper, can wet the wet construction, that is, primer coating good, a few minutes to dry, you can immediately paint, spray after a few minutes can be put into the oven, the gradual baking to 170-180 Shan, thermostat $number min, you can cool the finished product.
Special attention, attention to the gun distance, air pressure control, the whole surface after spraying can not have threadbare, oil and other phenomena.